Straight-Line Motion Explained
Position, velocity and acceleration for a particle on a line: direction, speed, when it turns around, and when it speeds up or slows down.
Runs 6:47. Watch on YouTube
What this lesson covers
This lesson builds position, velocity and acceleration from one car on a track. Velocity is the derivative of position and its sign gives the direction. Speed is the absolute value of velocity. The particle turns around where velocity changes sign, which is a stronger condition than velocity being zero.
The particle speeds up when velocity and acceleration have the same sign and slows down when they have opposite signs, so negative acceleration does not always mean slowing down. The lesson includes one worked example and two check questions.
- 4.2Straight-Line Motion: Connecting Position, Velocity, and Acceleration
Practice it on CalcLearn
Transcript
0:00A car on a track
This little car is racing to the right along a straight track. Watch the arrow on it. It's shrinking. At one second, the car stops. Then it heads left, faster and faster. Then it slows down, stops again, and turns back to the right.
All of that is hiding inside one formula, and by the end you'll read it straight off the formula: which way the car is going, when it turns around, and whether it's speeding up. This is straight-line motion, AP Calculus topic 4.2.
0:31Position
Start with where the car is. Lay a number line along the track, with zero where the car started. The car's position, s(t), is its coordinate on that line: positive to the right of zero, negative to the left. Now plot that coordinate against time. As the car moves, its dot traces a curve: rising while the car goes right, falling while it goes left. That's the position graph.
This car follows s(t) = 2t³ − 15t² + 24t, in feet, for t from 0 to 5 seconds. At t = 1 it's 11 feet right of the start, its farthest right. At t = 4 it's at −16, its farthest left.
1:13Velocity and speed
How fast, and which way? Look at the slope of the position graph. Steep and rising: moving right, quickly. Flat: stopped, for an instant. Falling: moving left. A slope at an instant is a derivative. So velocity is the derivative of position: v(t) = s′(t).
For our car, v(t) = 6t² − 30t + 24, which factors as 6(t − 1)(t − 4). The sign of velocity is the direction. Positive means moving right, or up. Negative means moving left, or down. The arrow on the car is the velocity: it points the way the car moves, and its length is how fast.
Speed is how fast, with no direction: the absolute value of velocity. At t = 3, v is 6 times 2 times −1, which is −12. The car is moving left, at a speed of 12 feet per second. Velocity can be negative. Speed never is.
2:11When it changes direction
So when does the car turn around? When the velocity changes sign. Here's the graph of v. It's positive until t = 1, negative from 1 to 4, and positive again after 4. So the car changes direction at t = 1 and at t = 4. At each one, velocity is zero and crosses from one sign to the other.
Zero alone isn't enough. A particle with v(t) = (t − 2)² stops for an instant at t = 2, but its velocity is positive on both sides, so it keeps going the same way. Velocity has to cross zero, not just touch it.
2:48Acceleration
Now the arrow's length. Between 0 and 1 second it shrinks, because the velocity is changing. The rate velocity changes is the acceleration: a(t) = v′(t), the second derivative of position. Here a(t) = 12t − 30. It's zero at t = 2.5: negative before that, positive after.
3:08Speeding up or slowing down
Now the question every motion problem asks: is the car speeding up or slowing down? Don't look at acceleration alone. Compare the signs of velocity and acceleration. Same sign: speeding up. Opposite signs: slowing down. Think of acceleration as a push. If it pushes the way you're already going, you go faster. If it pushes against you, you slow down.
Walk the car through it. From 0 to 1, velocity is positive and acceleration is negative. Opposite signs, so it's slowing down, and the arrow shrinks to nothing at t = 1. From 1 to 2.5, both are negative: speeding up, to the left. From 2.5 to 4, velocity is negative but acceleration is positive: slowing down again. From 4 to 5, both are positive: speeding up, to the right.
3:56The usual mistake
That second stretch is where most students slip. Acceleration is negative there, and it's tempting to say negative acceleration means slowing down. It doesn't. At t = 2, a is −6 and v is −12. Both negative, so the car is speeding up: its speed is 12 and climbing.
Negative acceleration only means velocity is decreasing. If velocity is already negative, decreasing makes it more negative, and that's faster.
4:23Worked example
Let's do one start to finish. A particle moves along the x-axis with position x(t) = t³ − 12t + 5, for t ≥ 0. When does it change direction, and at t = 1 is it speeding up or slowing down?
Differentiate: v(t) = 3t² − 12, which factors as 3(t − 2)(t + 2). For t ≥ 0, velocity is zero only at t = 2. Test a point on each side: v(1) = −9, and v(3) = 15. Negative, then positive, so it changes direction at t = 2.
Differentiate again: a(t) = 6t, so a(1) = 6. At t = 1, v is −9 and a is 6. Opposite signs, so the particle is slowing down, moving left at a speed of 9.
5:15Check yourself
Your turn. A particle has velocity v(t) = 5 − 2t. At t = 4, is it speeding up or slowing down? Pause and decide. At t = 4, v is 5 − 8, which is −3. And a(t) is −2 the whole time. Both negative: it's speeding up. If you said slowing down because the acceleration is negative, that's the trap from before.
One more. A particle has velocity v(t) = (t − 3)²(t − 6) for 0 < t < 8. At which times does it change direction? Pause and decide. Velocity is zero at 3 and at 6. But (t − 3)² is never negative, so v has the same sign as t − 6: negative before 6, positive after. At t = 3 it only touches zero. It changes direction only at t = 6.
6:17Recap
Recap. Position is where it is. Velocity is the derivative of position: its sign is the direction, and speed is its absolute value. Acceleration is the derivative of velocity. It turns around where velocity changes sign. And it speeds up when velocity and acceleration share a sign, and slows down when they don't. For more worked examples, go to calclearn.org, glossary, rectilinear motion.