AP Calculus BC

Logistic Growth: Carrying Capacity and Fastest Growth

A logistic differential equation has the form dP/dt = kP(1 - P/L) with k and L positive. For any positive starting value, P approaches the carrying capacity L as t increases. The growth rate dP/dt is largest when P = L/2, and a solution that starts below L/2 has its inflection point there.

Reading the equation

Exponential growth assumes a population can grow forever. A logistic model adds a ceiling, called the carrying capacity, and slows the growth as the population approaches it. Topic 7.9, Logistic Models with Differential Equations, is a BC-only topic. The standard form is

dPdt=kP(1−PL),k>0,  L>0\frac{dP}{dt} = kP\left(1 - \frac{P}{L}\right), \quad k > 0, \; L > 0

Here LL is the carrying capacity and kk is the growth constant. When PP is small compared with LL, the factor 1−PL1 - \frac{P}{L} is close to 11 and the population grows almost exponentially with rate constant kk. As PP gets close to LL, that factor approaches 00 and growth stalls.

The same equation can be written in other ways, and problems often use them:

FormExample with k=2k = 2, L=500L = 500
dPdt=kP(1−PL)\frac{dP}{dt} = kP\left(1 - \frac{P}{L}\right)dPdt=2P(1−P500)\frac{dP}{dt} = 2P\left(1 - \frac{P}{500}\right)
dPdt=kLP(L−P)\frac{dP}{dt} = \frac{k}{L}P(L - P)dPdt=0.004P(500−P)\frac{dP}{dt} = 0.004P(500 - P)
dPdt=kP−kLP2\frac{dP}{dt} = kP - \frac{k}{L}P^2dPdt=2P−0.004P2\frac{dP}{dt} = 2P - 0.004P^2

Fastest way to find the carrying capacity

Set dPdt=0\frac{dP}{dt} = 0 and solve for PP. A logistic equation has exactly two solutions: P=0P = 0 and P=LP = L. The nonzero one is the carrying capacity, whatever form the equation is written in.

Long-run behavior

The sign of dPdt\frac{dP}{dt} tells you which way the population moves, and it depends only on where PP sits relative to 00 and LL.

Starting valueSign of dPdt\frac{dP}{dt}Behavior
P0=0P_0 = 0zerostays at 00
0<P0<L0 < P_0 < Lpositiveincreases toward LL
P0=LP_0 = Lzerostays at LL
P0>LP_0 > Lnegativedecreases toward LL

For every positive starting value, lim⁡t→∞P(t)=L\lim_{t \to \infty} P(t) = L. A solution that starts below LL rises toward LL without reaching it, and a solution that starts above LL falls toward LL without reaching it. A limit question about a logistic model is answered by identifying LL from the equation. No solving is required.

Fastest growth happens at half the carrying capacity

Treat the growth rate as a function of PP. Expanding gives dPdt=kP−kLP2\frac{dP}{dt} = kP - \frac{k}{L}P^2, a downward-opening parabola in PP with zeros at P=0P = 0 and P=LP = L. Its vertex is halfway between the zeros, at P=L2P = \frac{L}{2}. Substituting gives the largest possible growth rate:

dPdt∣P=L/2=k⋅L2(1−12)=kL4\left.\frac{dP}{dt}\right|_{P = L/2} = k \cdot \frac{L}{2}\left(1 - \frac{1}{2}\right) = \frac{kL}{4}

The second derivative tells the same story from the graph of PP against tt. Differentiating kP−kLP2kP - \frac{k}{L}P^2 with respect to tt and using the chain rule:

d2Pdt2=k(1−2PL)dPdt\frac{d^2P}{dt^2} = k\left(1 - \frac{2P}{L}\right)\frac{dP}{dt}

For 0<P<L20 < P < \frac{L}{2} both factors are positive, so the solution curve is concave up and growth is speeding up. For L2<P<L\frac{L}{2} < P < L the first factor is negative and dPdt\frac{dP}{dt} is still positive, so the curve is concave down and growth is slowing. A solution that starts below L2\frac{L}{2} therefore has an inflection point when P=L2P = \frac{L}{2}, which produces the S-shaped curve.

Keep two questions separate. The population at which growth is fastest is L2\frac{L}{2}, a population value. The fastest growth rate is kL4\frac{kL}{4}, a rate with units of population per unit time. For how this model differs from unlimited growth, see exponential vs logistic growth.

The solution formula

Separating variables and using partial fractions on 1P(L−P)\frac{1}{P(L - P)} leads to an explicit solution. With P(0)=P0P(0) = P_0 and P0>0P_0 > 0:

P(t)=L1+Ae−kt,A=L−P0P0P(t) = \frac{L}{1 + Ae^{-kt}}, \quad A = \frac{L - P_0}{P_0}

Two checks confirm it behaves correctly. At t=0t = 0 the formula gives L1+A=L1+L−P0P0=P0\frac{L}{1 + A} = \frac{L}{1 + \frac{L - P_0}{P_0}} = P_0. As t→∞t \to \infty, e−kt→0e^{-kt} \to 0 and P→LP \to L.

When P0<L2P_0 < \frac{L}{2}, so that A>1A > 1, the formula also gives the time of fastest growth. Setting P=L2P = \frac{L}{2} requires Ae−kt=1Ae^{-kt} = 1, so t=ln⁡Akt = \frac{\ln A}{k}. The first two worked examples below are answered from the differential equation alone. The third uses the formula.

Common mistakes

  • Misreading LL when the equation is not in standard form. In dPdt=2P−0.004P2\frac{dP}{dt} = 2P - 0.004P^2, the carrying capacity is 500500, found by setting the rate to zero.
  • Saying growth is fastest at P=LP = L. At P=LP = L the growth rate is zero. The rate is largest at P=L2P = \frac{L}{2}.
  • Giving the population L2\frac{L}{2} when the question asks for the maximum rate kL4\frac{kL}{4}, or the reverse.
  • Assuming every solution increases. A population that starts above LL decreases toward LL.
  • Claiming an inflection point for a solution that starts between L2\frac{L}{2} and LL. That solution is concave down the whole time and never passes through P=L2P = \frac{L}{2}.
  • Solving the differential equation when the question only needs the limit or the fastest-growth population.

Quick check

Plug your value of LL back into the differential equation. The rate must come out to exactly zero. Then plug in L2\frac{L}{2} and confirm the rate equals kL4\frac{kL}{4}.

Worked examples

Worked example

Limit and fastest growth from standard form

A population satisfies dPdt=0.4P(1−P600)\frac{dP}{dt} = 0.4P\left(1 - \frac{P}{600}\right) with P(0)=50P(0) = 50, where tt is in years. Find lim⁡t→∞P(t)\lim_{t \to \infty} P(t), the population at which PP is growing fastest, and that fastest growth rate.

  1. Read the constants from standard form: k=0.4k = 0.4 and L=600L = 600.
  2. Find the limit. Since P(0)=50P(0) = 50 is positive, lim⁡t→∞P(t)=L=600\lim_{t \to \infty} P(t) = L = 600.
  3. Find where growth is fastest: P=L2=300P = \frac{L}{2} = 300. Because P(0)=50P(0) = 50 is below 300300, the solution does reach this value.
  4. Find the rate there: dPdt=0.4(300)(1−300600)=120⋅12=60\frac{dP}{dt} = 0.4(300)\left(1 - \frac{300}{600}\right) = 120 \cdot \frac{1}{2} = 60.

The limit is 600600. Growth is fastest when P=300P = 300, at a rate of 6060 per year.

Worked example

A nonstandard form and a start above capacity

A population satisfies dPdt=2P−0.004P2\frac{dP}{dt} = 2P - 0.004P^2 with P(0)=800P(0) = 800. Find the carrying capacity, decide whether PP is increasing or decreasing at t=0t = 0, find lim⁡t→∞P(t)\lim_{t \to \infty} P(t), and determine the concavity of the solution at t=0t = 0.

  1. Find the carrying capacity by setting the rate to zero: 2P−0.004P2=P(2−0.004P)=02P - 0.004P^2 = P(2 - 0.004P) = 0 gives P=0P = 0 or P=20.004=500P = \frac{2}{0.004} = 500. So L=500L = 500, and the standard form is dPdt=2P(1−P500)\frac{dP}{dt} = 2P\left(1 - \frac{P}{500}\right) with k=2k = 2.
  2. Evaluate the rate at P=800P = 800: dPdt=2(800)−0.004(800)2=1600−2560=−960\frac{dP}{dt} = 2(800) - 0.004(800)^2 = 1600 - 2560 = -960. The rate is negative, so PP is decreasing.
  3. Find the limit. The starting value is positive, so lim⁡t→∞P(t)=500\lim_{t \to \infty} P(t) = 500. The population falls toward the carrying capacity from above.
  4. Find the concavity with d2Pdt2=k(1−2PL)dPdt\frac{d^2P}{dt^2} = k\left(1 - \frac{2P}{L}\right)\frac{dP}{dt}. At P=800P = 800: 2(1−1600500)(−960)=2(−2.2)(−960)=4224>02\left(1 - \frac{1600}{500}\right)(-960) = 2(-2.2)(-960) = 4224 > 0. The solution is concave up at t=0t = 0.

L=500L = 500. At t=0t = 0 the population is decreasing at 960960 per unit time and its graph is concave up. The limit is 500500.

Worked example

Using the solution formula

A population satisfies dPdt=0.5P(1−P1000)\frac{dP}{dt} = 0.5P\left(1 - \frac{P}{1000}\right) with P(0)=100P(0) = 100, where tt is in months. Write P(t)P(t) and find the time at which the population is growing fastest.

  1. Read the constants: k=0.5k = 0.5, L=1000L = 1000, P0=100P_0 = 100.
  2. Compute A=L−P0P0=1000−100100=9A = \frac{L - P_0}{P_0} = \frac{1000 - 100}{100} = 9.
  3. Write the solution: P(t)=10001+9e−0.5tP(t) = \frac{1000}{1 + 9e^{-0.5t}}. Check: P(0)=100010=100P(0) = \frac{1000}{10} = 100.
  4. Growth is fastest when P=L2=500P = \frac{L}{2} = 500. Set 10001+9e−0.5t=500\frac{1000}{1 + 9e^{-0.5t}} = 500: then 1+9e−0.5t=21 + 9e^{-0.5t} = 2, so e−0.5t=19e^{-0.5t} = \frac{1}{9}.
  5. Solve for tt: −0.5t=−ln⁡9-0.5t = -\ln 9, so t=2ln⁡9≈4.394t = 2\ln 9 \approx 4.394 months.

P(t)=10001+9e−0.5tP(t) = \frac{1000}{1 + 9e^{-0.5t}}, and the population is growing fastest at t=2ln⁡9≈4.394t = 2\ln 9 \approx 4.394 months, when P=500P = 500.

Frequently asked questions

How do I find the carrying capacity from a logistic differential equation?

Set dPdt=0\frac{dP}{dt} = 0 and solve for PP. The nonzero solution is the carrying capacity. In standard form dPdt=kP(1−PL)\frac{dP}{dt} = kP\left(1 - \frac{P}{L}\right) you can read LL directly.

When is a logistic population growing fastest?

When the population equals half the carrying capacity, P=L2P = \frac{L}{2}. The growth rate at that moment is kL4\frac{kL}{4}. On the graph of PP against tt, this is the inflection point of a solution that starts below L2\frac{L}{2}.

What happens if the population starts above the carrying capacity?

The growth rate is negative, so the population decreases. It approaches the carrying capacity from above, and its limit as t→∞t \to \infty is still LL.