AP Calculus AB and BC

Extreme Value Theorem and the Candidates Test

The Extreme Value Theorem says a function that is continuous on a closed interval [a, b] has an absolute maximum and minimum there. To find them, use the candidates test: evaluate f at every critical point inside the interval and at both endpoints. The largest value is the maximum and the smallest is the minimum.

What the Extreme Value Theorem says

The Extreme Value Theorem (EVT) has one hypothesis with two parts: the function is continuous, and the interval is closed. If ff is continuous on [a,b][a, b], then ff attains an absolute maximum value and an absolute minimum value somewhere on [a,b][a, b]. The theorem appears in CED Topic 5.2, Extreme Value Theorem, Global Versus Local Extrema, and Critical Points.

An absolute (global) maximum is the largest value ff takes on the whole interval. A relative (local) maximum is a value that is largest only compared with nearby points. The EVT is about absolute extrema. Like the Mean Value Theorem, it is an existence theorem: it promises that the extreme values exist and leaves the job of locating them to you.

Critical points

A critical point of ff is a number cc in the domain of ff where f′(c)=0f'(c) = 0 or f′(c)f'(c) does not exist. These are the only interior points where an extremum can occur. If ff has a relative maximum or minimum at an interior point cc, then cc is a critical point.

The reverse is false. A critical point is a candidate, and it may turn out to be neither a maximum nor a minimum. For f(x)=x3f(x) = x^3, the derivative f′(x)=3x2f'(x) = 3x^2 is zero at x=0x = 0, yet the function increases straight through that point.

Two kinds of critical point

Check both conditions every time. f(x)=x2/3f(x) = x^{2/3} has f′(x)=23x1/3f'(x) = \frac{2}{3x^{1/3}}, which is never zero and is undefined at x=0x = 0. Since f(0)f(0) exists, x=0x = 0 is a critical point, and it is where the absolute minimum occurs.

The candidates test

On a closed interval, an absolute extremum can occur only at a critical point inside the interval or at an endpoint. That short list is the set of candidates, and the candidates test (CED Topic 5.5, Using the Candidates Test to Determine Absolute (Global) Extrema) is the procedure of checking each one. It is also called the closed interval method.

  1. Confirm that ff is continuous on [a,b][a, b], so the EVT guarantees the extrema exist.
  2. Find f′(x)f'(x) and locate every critical point in the open interval (a,b)(a, b).
  3. Evaluate ff (the original function, not f′f') at each critical point and at both endpoints aa and bb.
  4. Compare. The largest value is the absolute maximum and the smallest is the absolute minimum.

A table of candidates and their function values is a complete justification. No sign chart is needed, because you are comparing actual values and the list contains every place an extremum could be. State where each extreme value occurs and what the value is; a question that asks for the absolute maximum value wants the yy-value.

Why both hypotheses matter

Drop either part of the hypothesis and the guarantee disappears.

Function and intervalWhat failsResult
f(x)=xf(x) = x on (0,1)(0, 1)Interval is openNo maximum and no minimum: the values get close to 00 and 11 and never reach them
f(x)=1xf(x) = \frac{1}{x} on (0,1](0, 1]Interval is not closed at 00Minimum of 11 at x=1x = 1, no maximum because the values grow without bound
f(x)=1xf(x) = \frac{1}{x} for x≠0x \neq 0, f(0)=0f(0) = 0, on [−1,1][-1, 1]Not continuous at x=0x = 0No maximum and no minimum

A function can still have absolute extrema when the hypotheses fail. The theorem just no longer promises them. On an open or unbounded interval you need a different argument, such as the behavior of f′f' on either side of a lone critical point.

Where students lose points

  • Forgetting the endpoints. Absolute extrema on a closed interval often occur at an endpoint, where f′f' need not be zero.
  • Plugging candidates into f′f' when the question asks for extreme values. The comparison uses values of ff.
  • Including critical points that lie outside the interval. Only candidates in [a,b][a, b] count.
  • Missing critical points where f′f' is undefined.
  • Answering with the location when the question asks for the value, or the value when it asks for the location. Give both when in doubt.
  • Stopping at a relative extremum. A relative maximum found with a sign chart is not automatically the absolute maximum; the endpoints still have to be compared.

Worked examples

Worked example

A polynomial on a closed interval

Find the absolute maximum and minimum values of f(x)=x3−6x2+9x+2f(x) = x^3 - 6x^2 + 9x + 2 on [0,5][0, 5].

  1. ff is a polynomial, so it is continuous on [0,5][0, 5] and the EVT guarantees both extrema exist.
  2. Find the critical points: f′(x)=3x2−12x+9=3(x−1)(x−3)f'(x) = 3x^2 - 12x + 9 = 3(x - 1)(x - 3), which is zero at x=1x = 1 and x=3x = 3. Both lie in (0,5)(0, 5).
  3. Evaluate ff at the candidates. f(0)=2f(0) = 2. f(1)=1−6+9+2=6f(1) = 1 - 6 + 9 + 2 = 6. f(3)=27−54+27+2=2f(3) = 27 - 54 + 27 + 2 = 2. f(5)=125−150+45+2=22f(5) = 125 - 150 + 45 + 2 = 22.
  4. Compare the four values: 22, 66, 22, 2222.

The absolute maximum value is 2222, at x=5x = 5. The absolute minimum value is 22, which occurs at both x=0x = 0 and x=3x = 3.

Worked example

A critical point where the derivative does not exist

Find the absolute extrema of f(x)=x2/3f(x) = x^{2/3} on [−1,8][-1, 8].

  1. ff is continuous on [−1,8][-1, 8], so the EVT applies.
  2. Differentiate: f′(x)=23x−1/3=23x1/3f'(x) = \frac{2}{3}x^{-1/3} = \frac{2}{3x^{1/3}}. This is never zero. It is undefined at x=0x = 0, and f(0)f(0) exists, so x=0x = 0 is the only critical point.
  3. Evaluate ff at the candidates. f(−1)=((−1)2)1/3=1f(-1) = ((-1)^2)^{1/3} = 1. f(0)=0f(0) = 0. f(8)=(81/3)2=22=4f(8) = (8^{1/3})^2 = 2^2 = 4.

The absolute maximum is 44 at x=8x = 8 and the absolute minimum is 00 at x=0x = 0.

Worked example

An exponential product

Find the absolute maximum and minimum values of f(x)=xe−xf(x) = xe^{-x} on [0,3][0, 3].

  1. ff is a product of continuous functions, so it is continuous on [0,3][0, 3].
  2. Differentiate with the product rule: f′(x)=e−x−xe−x=e−x(1−x)f'(x) = e^{-x} - xe^{-x} = e^{-x}(1 - x). Since e−xe^{-x} is never zero, the only critical point is x=1x = 1.
  3. Evaluate ff at the candidates. f(0)=0f(0) = 0. f(1)=1e≈0.368f(1) = \frac{1}{e} \approx 0.368. f(3)=3e3≈0.149f(3) = \frac{3}{e^3} \approx 0.149.

The absolute maximum value is 1e\frac{1}{e} at x=1x = 1 and the absolute minimum value is 00 at x=0x = 0.

Frequently asked questions

Does the Extreme Value Theorem work on an open interval?

No. The theorem requires a closed interval [a,b][a, b]. On an open interval a continuous function may have no maximum or minimum, as f(x)=xf(x) = x on (0,1)(0, 1) shows. Extrema can still exist on an open interval, but the theorem does not guarantee them.

Can an absolute maximum occur at an endpoint?

Yes. On a closed interval the absolute maximum or minimum is often at an endpoint, and the derivative there does not have to be zero. That is why the candidates test always includes both endpoints.

Is every critical point a maximum or minimum?

No. A critical point is only a candidate. f(x)=x3f(x) = x^3 has a critical point at x=0x = 0 because f′(0)=0f'(0) = 0, but the function is increasing on both sides, so there is no extremum there.