AP Calculus BC

How to Find the Radius and Interval of Convergence

Apply the ratio test to the general term, treating x as a constant. Setting the limit less than 1 and solving gives |x - a| < R, where R is the radius of convergence and a is the center. The ratio test is inconclusive at x = a - R and x = a + R, so substitute each endpoint and test that series separately.

Where a power series can converge

A power series centered at aa is a series in powers of (x−a)(x - a) with coefficients cnc_n. Whether it converges depends on the value of xx. CED Topic 10.13, Radius and Interval of Convergence of Power Series, is about finding every xx that works.

∑n=0∞cn(x−a)n=c0+c1(x−a)+c2(x−a)2+⋯\sum_{n=0}^{\infty} c_n (x - a)^n = c_0 + c_1(x - a) + c_2(x - a)^2 + \cdots

Exactly one of three things happens.

BehaviorRadius of convergenceInterval of convergence
Converges only at x=ax = aR=0R = 0The single point x=ax = a
Converges for ∣x−a∣<R|x - a| < R and diverges for ∣x−a∣>R|x - a| > RA positive number RRFrom a−Ra - R to a+Ra + R, with each endpoint included or excluded
Converges for every xxR=∞R = \infty(−∞,∞)(-\infty, \infty)

The radius is a distance from the center. The interval is the full set of xx-values, so it also records what happens at the two endpoints. Every power series converges at its center, where all terms after the first are zero.

Finding the radius with the ratio test

The ratio test (CED Topic 10.8, Ratio Test for Convergence) is the standard tool because the powers of (x−a)(x - a) cancel to a single factor.

  1. Write the general term un=cn(x−a)nu_n = c_n (x - a)^n and the next term un+1u_{n+1}.
  2. Form ∣un+1un∣\left| \frac{u_{n+1}}{u_n} \right| and simplify. The result is a power of ∣x−a∣|x - a|, usually the first power, times an expression in nn.
  3. Take the limit as n→∞n \to \infty. Treat xx as a constant, so ∣x−a∣|x - a| comes out of the limit.
  4. Set the limit less than 11 and solve the inequality for ∣x−a∣|x - a|. The number on the right is RR.
  5. Rewrite ∣x−a∣<R|x - a| < R as a−R<x<a+Ra - R < x < a + R. This is the open interval where the series converges absolutely.

For ∣x−a∣>R|x - a| > R the ratio limit is greater than 11 and the series diverges. That leaves only the two points where ∣x−a∣=R|x - a| = R.

Checking the endpoints

At x=a−Rx = a - R and x=a+Rx = a + R the ratio test limit equals 11, so it gives no information. Each endpoint has to be handled as its own problem.

  1. Substitute the endpoint value for xx and simplify. The result is a series of constants.
  2. Choose a test for that series: the p-series rule, the nth term test, the alternating series test, or a comparison.
  3. Include the endpoint in the interval if the series converges there, and exclude it if the series diverges.

The two endpoints are independent. A series can converge at both, at neither, or at just one, so the final interval may use any combination of brackets and parentheses. One endpoint often produces an alternating series while the other produces the same terms with all signs positive.

Radius zero, infinite radius and powers of x

Two outcomes of the ratio limit end the problem early. If the limit is 00 for every xx, then it is always less than 11, the series converges everywhere, and R=∞R = \infty. If the limit is infinite for every x≠ax \neq a, the series converges only at the center and R=0R = 0. Neither case has endpoints to check. Factorials are the usual cause: n!n! in the denominator tends to give R=∞R = \infty, and n!n! in the numerator tends to give R=0R = 0.

Watch the exponent on x

For ∑n=0∞x2n4n\sum_{n=0}^{\infty} \frac{x^{2n}}{4^n} the ratio of consecutive terms is x24\frac{x^2}{4}. Setting x24<1\frac{x^2}{4} < 1 gives x2<4x^2 < 4, so ∣x∣<2|x| < 2 and R=2R = 2. The radius is not 44. Always finish solving for ∣x−a∣|x - a| itself before reading off RR.

Common mistakes

  • Stopping at the open interval and never testing the endpoints.
  • Testing the endpoints with the ratio test again. It always gives 11 there.
  • Dropping the absolute value, which loses the left half of the interval.
  • Centering the interval at 00 when the series is in powers of (x−a)(x - a). The interval is centered at aa.
  • Reporting the length of the interval as the radius. The radius is half the length.
  • Assuming both endpoints behave the same way.

Worked examples

Worked example

One endpoint in, one endpoint out

Find the radius and interval of convergence of ∑n=1∞(x−3)nn⋅2n\sum_{n=1}^{\infty} \frac{(x - 3)^n}{n \cdot 2^n}.

  1. Form the ratio of consecutive terms: ∣(x−3)n+1(n+1)⋅2n+1⋅n⋅2n(x−3)n∣=∣x−3∣2⋅nn+1\left| \frac{(x - 3)^{n+1}}{(n+1) \cdot 2^{n+1}} \cdot \frac{n \cdot 2^n}{(x - 3)^n} \right| = \frac{|x - 3|}{2} \cdot \frac{n}{n+1}.
  2. Take the limit: nn+1→1\frac{n}{n+1} \to 1, so the limit is ∣x−3∣2\frac{|x - 3|}{2}.
  3. Set it less than 11: ∣x−3∣2<1\frac{|x - 3|}{2} < 1 gives ∣x−3∣<2|x - 3| < 2. The radius is R=2R = 2 and the open interval is 1<x<51 < x < 5.
  4. Endpoint x=5x = 5: the series becomes ∑2nn⋅2n=∑1n\sum \frac{2^n}{n \cdot 2^n} = \sum \frac{1}{n}, the harmonic series, which diverges.
  5. Endpoint x=1x = 1: the series becomes ∑(−2)nn⋅2n=∑(−1)nn\sum \frac{(-2)^n}{n \cdot 2^n} = \sum \frac{(-1)^n}{n}. The sizes 1n\frac{1}{n} decrease to 00, so it converges by the alternating series test.
  6. Include x=1x = 1 and exclude x=5x = 5.

R=2R = 2, and the interval of convergence is [1,5)[1, 5).

Worked example

Both endpoints included

Find the radius and interval of convergence of ∑n=0∞(−1)n(x+1)nn2+1\sum_{n=0}^{\infty} \frac{(-1)^n (x + 1)^n}{n^2 + 1}.

  1. Form the ratio of consecutive terms. The factors of −1-1 disappear inside the absolute value: ∣(x+1)n+1(n+1)2+1⋅n2+1(x+1)n∣=∣x+1∣⋅n2+1n2+2n+2\left| \frac{(x + 1)^{n+1}}{(n+1)^2 + 1} \cdot \frac{n^2 + 1}{(x + 1)^n} \right| = |x + 1| \cdot \frac{n^2 + 1}{n^2 + 2n + 2}.
  2. Take the limit: the fraction approaches 11, so the limit is ∣x+1∣|x + 1|.
  3. Set it less than 11: ∣x+1∣<1|x + 1| < 1. The center is a=−1a = -1, the radius is R=1R = 1, and the open interval is −2<x<0-2 < x < 0.
  4. Endpoint x=0x = 0: (x+1)n=1(x + 1)^n = 1, so the series is ∑(−1)nn2+1\sum \frac{(-1)^n}{n^2 + 1}. Its absolute values are 1n2+1\frac{1}{n^2 + 1}, which are less than 1n2\frac{1}{n^2} for n≥1n \ge 1. By comparison with the convergent p-series ∑1n2\sum \frac{1}{n^2}, the series converges absolutely.
  5. Endpoint x=−2x = -2: (x+1)n=(−1)n(x + 1)^n = (-1)^n, and (−1)n⋅(−1)n=1(-1)^n \cdot (-1)^n = 1, so the series is ∑1n2+1\sum \frac{1}{n^2 + 1}. It converges by the same comparison.
  6. Include both endpoints.

R=1R = 1, and the interval of convergence is [−2,0][-2, 0].

Worked example

Factorials: radius zero and infinite radius

Find the radius of convergence of (a) ∑n=0∞n! (x−1)n\sum_{n=0}^{\infty} n!\,(x - 1)^n and (b) ∑n=0∞3nxnn!\sum_{n=0}^{\infty} \frac{3^n x^n}{n!}.

  1. (a) Form the ratio: ∣(n+1)! (x−1)n+1n! (x−1)n∣=(n+1) ∣x−1∣\left| \frac{(n+1)!\,(x - 1)^{n+1}}{n!\,(x - 1)^n} \right| = (n + 1)\,|x - 1|.
  2. (a) For any x≠1x \neq 1 this grows without bound as n→∞n \to \infty, so the limit is infinite and the series diverges. At x=1x = 1 every term after the first is 00, so the series converges. The radius is R=0R = 0.
  3. (b) Form the ratio: ∣3n+1xn+1(n+1)!⋅n!3nxn∣=3∣x∣n+1\left| \frac{3^{n+1} x^{n+1}}{(n+1)!} \cdot \frac{n!}{3^n x^n} \right| = \frac{3|x|}{n + 1}.
  4. (b) For any fixed xx this approaches 00 as n→∞n \to \infty. Since 0<10 < 1 for every xx, the series converges everywhere. The radius is R=∞R = \infty.

(a) R=0R = 0; the series converges only at x=1x = 1. (b) R=∞R = \infty; the interval of convergence is (−∞,∞)(-\infty, \infty).

Frequently asked questions

Why do I have to check the endpoints separately?

The ratio test proves convergence when its limit is less than 11 and divergence when it is greater than 11. At the endpoints ∣x−a∣=R|x - a| = R, and the limit is exactly 11, which is the inconclusive case. The series at each endpoint is an ordinary series of numbers, so it gets its own test.

What is the difference between the radius and the interval of convergence?

The radius RR is one number: how far from the center the series is guaranteed to converge. The interval is the complete set of xx-values where the series converges, which is the open interval from a−Ra - R to a+Ra + R together with whichever endpoints converge. Two series can share a radius and have different intervals.

Does differentiating a power series change where it converges?

Differentiating or integrating term by term keeps the same radius of convergence. The behavior at the endpoints can change. For example, ∑n=1∞xnn\sum_{n=1}^{\infty} \frac{x^n}{n} converges on [−1,1)[-1, 1), and its term-by-term derivative ∑n=1∞xn−1\sum_{n=1}^{\infty} x^{n-1} is geometric and converges only on (−1,1)(-1, 1).