AP Calculus AB and BC

Particle Motion: Velocity, Speed, and Total Distance

For a particle on a line with position x(t), velocity is v(t) = x'(t) and acceleration is a(t) = v'(t). The sign of v gives direction, speed is the absolute value of v, and the particle speeds up when v and a have the same sign. Displacement is the integral of v. Total distance is the integral of |v|.

Position, velocity, and acceleration

Straight-line (rectilinear) motion problems track a particle moving along a number line. Three functions of time describe it, and each is the derivative of the one before. This is CED Topic 4.2, Straight-Line Motion: Connecting Position, Velocity, and Acceleration.

QuantitySymbolRelationshipWhat it tells you
Positionx(t)x(t)Given, or found by integrating v(t)v(t)Where the particle is
Velocityv(t)v(t)v(t)=x′(t)v(t) = x'(t)How fast position changes, with direction
Accelerationa(t)a(t)a(t)=v′(t)=x′′(t)a(t) = v'(t) = x''(t)How fast velocity changes

Some problems call the position s(t)s(t) or, for vertical motion, y(t)y(t) or h(t)h(t). The relationships are the same. Going down the table means differentiating; going up the table means integrating, which is where Unit 8 comes in.

Direction and rest

The sign of the velocity is the direction of motion.

  • v(t)>0v(t) > 0: position is increasing, so the particle moves in the positive direction (right on a horizontal line, up on a vertical one).
  • v(t)<0v(t) < 0: position is decreasing, so the particle moves in the negative direction (left or down).
  • v(t)=0v(t) = 0: the particle is at rest at that instant.

The particle changes direction at a time when vv changes sign. A zero of vv is necessary and not sufficient: if vv touches zero and keeps the same sign afterward, the particle pauses and continues the same way. Finding direction changes is a sign chart for vv, the same tool you use for increasing and decreasing intervals.

Speed, speeding up, and slowing down

Speed is the magnitude of velocity: speed =∣v(t)∣= |v(t)|. It is never negative and carries no direction. A velocity of −5-5 meters per second is a speed of 55 meters per second.

Whether the particle is speeding up or slowing down depends on the signs of velocity and acceleration together.

Sign of v(t)v(t)Sign of a(t)a(t)Speed is
PositivePositiveIncreasing (speeding up)
NegativeNegativeIncreasing (speeding up)
PositiveNegativeDecreasing (slowing down)
NegativePositiveDecreasing (slowing down)

Same signs means speeding up; opposite signs means slowing down. Acceleration pushes the velocity in the direction of its own sign. When that matches the direction the particle is already moving, the velocity gets farther from zero. When it opposes the motion, the velocity gets closer to zero.

Negative acceleration is not the same as slowing down

A particle with v=−4v = -4 and a=−2a = -2 is speeding up: its velocity is becoming more negative, so its speed is growing. To answer a speeding up question at a specific time, compute both vv and aa at that time and compare their signs.

Displacement, total distance, and position from velocity

Integrating velocity recovers change in position. CED Topic 8.2, Connecting Position, Velocity, and Acceleration of Functions Using Integrals, covers three related quantities on a time interval [t1,t2][t_1, t_2].

QuantityFormulaMeaning
Displacement∫t1t2v(t) dt\int_{t_1}^{t_2} v(t)\,dtNet change in position; can be negative
Total distance traveled∫t1t2∣v(t)∣ dt\int_{t_1}^{t_2} |v(t)|\,dtAll ground covered; never negative
Final positionx(t2)=x(t1)+∫t1t2v(t) dtx(t_2) = x(t_1) + \int_{t_1}^{t_2} v(t)\,dtStarting position plus displacement

Displacement lets backward motion cancel forward motion. Total distance counts both. Without a calculator, find total distance by splitting the interval at each time vv changes sign, integrating vv on each piece, and adding the absolute values. If you know the position function, the same total comes from adding the absolute values of the changes in position between consecutive turning times.

The same pattern gives velocity from acceleration: v(t2)=v(t1)+∫t1t2a(t) dtv(t_2) = v(t_1) + \int_{t_1}^{t_2} a(t)\,dt.

Where students lose points

  • Using the sign of acceleration alone to decide speeding up or slowing down. Compare it with the sign of velocity.
  • Reporting displacement when the question asks for total distance. If the particle turns around, the two differ.
  • Forgetting the initial position. ∫t1t2v(t) dt\int_{t_1}^{t_2} v(t)\,dt is a change in position; add x(t1)x(t_1) to get the position itself.
  • Confusing speed and velocity. Speed is ∣v(t)∣|v(t)|, and a question about when speed is greatest is a question about ∣v∣|v|.
  • Treating v(t)=0v(t) = 0 as an automatic change of direction without checking that vv changes sign.
  • Leaving off units. Position in meters and time in seconds give velocity in meters per second and acceleration in meters per second squared.

Worked examples

Worked example

Direction, rest, and speeding up

A particle moves along the xx-axis with position x(t)=t3−6t2+9tx(t) = t^3 - 6t^2 + 9t for t≥0t \geq 0. When is the particle at rest, when does it move left, and when is it speeding up?

  1. Velocity: v(t)=x′(t)=3t2−12t+9=3(t−1)(t−3)v(t) = x'(t) = 3t^2 - 12t + 9 = 3(t - 1)(t - 3). The particle is at rest when v(t)=0v(t) = 0, at t=1t = 1 and t=3t = 3.
  2. Sign of vv: v(0.5)=3(−0.5)(−2.5)=3.75>0v(0.5) = 3(-0.5)(-2.5) = 3.75 > 0, v(2)=3(1)(−1)=−3<0v(2) = 3(1)(-1) = -3 < 0, and v(4)=3(3)(1)=9>0v(4) = 3(3)(1) = 9 > 0. The particle moves right on (0,1)(0, 1), left on (1,3)(1, 3), and right for t>3t > 3.
  3. Acceleration: a(t)=v′(t)=6t−12a(t) = v'(t) = 6t - 12, which is negative for t<2t < 2 and positive for t>2t > 2.
  4. Compare signs on each interval. On (0,1)(0, 1): v>0v > 0, a<0a < 0, slowing down. On (1,2)(1, 2): v<0v < 0, a<0a < 0, speeding up. On (2,3)(2, 3): v<0v < 0, a>0a > 0, slowing down. For t>3t > 3: v>0v > 0, a>0a > 0, speeding up.

At rest at t=1t = 1 and t=3t = 3. Moving left for 1<t<31 < t < 3. Speeding up for 1<t<21 < t < 2 and for t>3t > 3, where vv and aa have the same sign.

Worked example

Displacement versus total distance

For the same particle, x(t)=t3−6t2+9tx(t) = t^3 - 6t^2 + 9t, find the displacement and the total distance traveled on 0≤t≤40 \leq t \leq 4.

  1. The particle changes direction at t=1t = 1 and t=3t = 3, so find the position at t=0,1,3,4t = 0, 1, 3, 4. x(0)=0x(0) = 0. x(1)=1−6+9=4x(1) = 1 - 6 + 9 = 4. x(3)=27−54+27=0x(3) = 27 - 54 + 27 = 0. x(4)=64−96+36=4x(4) = 64 - 96 + 36 = 4.
  2. Displacement is the net change: x(4)−x(0)=4−0=4x(4) - x(0) = 4 - 0 = 4.
  3. Total distance adds the size of each leg: ∣x(1)−x(0)∣+∣x(3)−x(1)∣+∣x(4)−x(3)∣=∣4∣+∣−4∣+∣4∣=12|x(1) - x(0)| + |x(3) - x(1)| + |x(4) - x(3)| = |4| + |-4| + |4| = 12.
  4. Check with the integral of velocity on the middle leg: ∫13(3t2−12t+9) dt=x(3)−x(1)=−4\int_1^3 (3t^2 - 12t + 9)\,dt = x(3) - x(1) = -4, a move of 44 units to the left.

Displacement is 44 units. Total distance traveled is 1212 units.

Worked example

Position and distance from a velocity function

A particle moves along a line with velocity v(t)=4−2tv(t) = 4 - 2t meters per second and is at position x(0)=3x(0) = 3 meters. Find its position at t=5t = 5 and the total distance it travels on 0≤t≤50 \leq t \leq 5.

  1. Position: x(5)=x(0)+∫05(4−2t) dtx(5) = x(0) + \int_0^5 (4 - 2t)\,dt. An antiderivative of 4−2t4 - 2t is 4t−t24t - t^2, so the integral is (20−25)−0=−5(20 - 25) - 0 = -5 and x(5)=3+(−5)=−2x(5) = 3 + (-5) = -2.
  2. Find where the particle turns: v(t)=0v(t) = 0 at t=2t = 2. v>0v > 0 on (0,2)(0, 2) and v<0v < 0 on (2,5)(2, 5).
  3. Integrate each piece. ∫02(4−2t) dt=(8−4)−0=4\int_0^2 (4 - 2t)\,dt = (8 - 4) - 0 = 4. ∫25(4−2t) dt=(20−25)−(8−4)=−9\int_2^5 (4 - 2t)\,dt = (20 - 25) - (8 - 4) = -9.
  4. Add absolute values: total distance =∣4∣+∣−9∣=13= |4| + |-9| = 13.

The particle is at x=−2x = -2 meters at t=5t = 5, and it travels a total distance of 1313 meters. Its displacement is −5-5 meters.

Frequently asked questions

What is the difference between speed and velocity?

Velocity is the rate of change of position and has a sign that shows direction. Speed is the absolute value of velocity, ∣v(t)∣|v(t)|, and is never negative. A particle with velocity −3-3 has speed 33.

How do I tell if a particle is speeding up or slowing down?

Compare the signs of velocity and acceleration at that time. If v(t)v(t) and a(t)a(t) have the same sign, the particle is speeding up. If they have opposite signs, it is slowing down.

What is the difference between displacement and total distance?

Displacement is ∫t1t2v(t) dt\int_{t_1}^{t_2} v(t)\,dt, the net change in position, where motion in the negative direction cancels motion in the positive direction. Total distance is ∫t1t2∣v(t)∣ dt\int_{t_1}^{t_2} |v(t)|\,dt, which counts all motion as positive. They are equal when v(t)≥0v(t) \geq 0 on the whole interval.

Where this shows up outside calculus class